Nylon hook & loop buckled straps go through punched channels on the plate for attachment. Straps are adjustable and reusable.

Installs easily, plastic plates can be secured to hand lines or oar holders. Plate has enough space for your registration number sequence and yearly permit decal.

Use the grab handles, ore locks, D-rings or perimeter rope around your vessel to attach the plate. Some inflatable boat models have no where to attach the plates depending on the model and brand.

• Includes qty. four (4) Nylon hook & loop adjustable straps and two (2) marine grade ABS Plates.
• Sold in pairs.
• Resists fade fuel and scratches.
• Semi-Flexible, 1/16 ABS Plastic.
• 100% Nylon Strap with Buckle.
• Rounded di-cut corners.
• Salt-water tough.
• Made in the USA!
• UPC:632194728882

NOTE: A space for your State Registration Decal(s) (Tag) will be incorporated into the spacing on your Port and Starboard plates as per your States Guidelines. We have all the State Guidelines in our database.

If you have a tender and would like the name of the Tendered Vessel please call in your order at 888-413-8315

B0CVNHH18W

The post Registration Sticker Plate for Inflatable Dinghy, Boat or Tender with Velcro Straps w/ Registration Letters & Numbers Applied appeared first on HardlineProducts.com.

Nylon hook & loop buckled straps go through punched channels on the plate for attachment. Straps are adjustable and reusable.

Installs easily, plastic plates can be secured to hand lines or oar holders. Plate has enough space for your registration number sequence and yearly permit decal. (Registration numbers not Included) If you need numbers on your plate click Here

For lettering choose from any of Hardline Products Factory Matched Registration Letter & Number Kits. Click Here for Registration Number Kits

Use the grab handles, ore locks, D-rings or perimeter rope around your dinghy to attach the plate. Check your Dinghy! Some inflatable boat models have no where to attach the plates depending on the model.

• Includes qty. four (4) Nylon hook & loop adjustable straps and two (2) marine grade ABS Plates.
• Sold in pairs.
• Resists fade fuel and scratches.
• Semi-Flexible, 1/16 ABS Plastic.
• 100% Nylon Strap with Buckle.
• Rounded di-cut corners.
• Salt-water tough.
• Made in the USA!
UPC:632194728875
B0CVNHH18W

Installation Tip: Affix your numbers to the smooth side of the plate.

The post Registration Sticker Plate for Inflatable Dinghy, Boat or Tender with Velcro Straps appeared first on HardlineProducts.com.

• Yellow Composite 1-1/16″ Marine  Boat Propeller Wrench and Prop Block Stop in one package.
• Fits propellers with a 1-1/16” nut.
• Includes a 9/16” Garboard / Drain Plug Socket.
• Will not slip.
• Made of non-corrosive durable glass reinforced composite material.
• Resistant to fuel, sun, salt water and other chemicals.
• Great to keep on board for emergencies – Not recommended for extended use.
• Highly visible color, easily recognizable in dark boat storage areas.
• Color- Yellow.
• Made in USA
• UPC: 632194728769
  B0CLSZLRCM
• Fits the following:
• Mercury Outboards 25, 30, 40, 150, 175, 200, 225, 250, 300, 400, 450.
• Mercruiser Alpha 1 & Bravo 1
• Mariner
• Mariner Mercury
• Force V4 & V6
• Honda Outboards BF75-BF130
• OMC Cobra
• Volvo Penta SX
• May fit other Makes/Models that have a 1-1/16 ” prop nut
  Please verify your fitment.Prop Block Stop:
  Propeller Block Stop – Fits all Outboard & Stern Drive applications and is easy to use. It securely holds prop during changing making prop-changing safer. Made from injection molded plastic. Will not harm propeller.
  • Plastic Marine Boat Prop Stop Propeller Stop Block
  • Securely holds prop during change out ~ Simple to use ~ Makes prop-changing safer.
  • Compact, lightweight, keep onboard with your prop wrench.

The post Propeller Wrench 1-1/16″ and Prop Block Stop appeared first on HardlineProducts.com.

• Plastic Marine Boat Prop Stop Propeller Stop Block
• Securely holds prop during change out ~ Simple to use ~ Makes prop-changing safer.
• Compact, lightweight, keep onboard with your prop wrench.
• Made in the USA!
  UPC: 632194728752Click here to order Propeller wrench
  Click here to order Propeller Bag, Wrench and Block Stop

The post Propeller Block Stop appeared first on HardlineProducts.com.

Protect your prop and the people around it with this bag from Hardline Products. This Prop Bag helps prevent your prop(s) from getting dinged when stored or from being a hazard when towing. It fits all 3, 4, and 5-blade props from 12″ to 15-1/2 OD inches in diameter.

Our Prop Bag is made from 600 denier heavy duty nylon with reinforced padded sides. Its hook-and-loop closure offers a tight fit that won’t come off when towing. It also includes hand straps for transporting, other features include an interior pocket for locking tab keeper and nut, also includes grommet locking holes for simple security to outdrive.

This combo pack also includes a polymer wrench that is easy to use with a long handle for extra leverage. Has an extra deep well. Fits all outboards with 1 1/16″ prop nuts. Made for OMC motors over 40HP and Mercury motors over 50HP. Good wrench to have in your boat in case of emergencies.

Propeller Block Stop – Fits all Outboard & Stern Drive application and is simple to use. It securely holds prop during changing making prop-changing safer. Made from injection molded plastic.

• Use Bag on Bravo, Solas, Turning Point, Quicksilver, Mercury, Michigan Wheel and Hydromotive style propellers
and duo props. (One bag for each prop on duo when off the drive.)

• Bag Fits 2, 3, 4 and 5 blade propellers from 12″ to 15 1/2″ O.D.

• Wrench is Emergency Polymer Prop Wrench for installation or removal. Size 1 & 1/16″  prop nuts.

• Wrench measures 2.75″ wide x 13″ long.

• Includes square drain plug installer/remover on backside of wrench. Size 9/16″ plugs

• Prop wrench and stop will not corrode or scratch. Great to store in boat.

• UPC 632194728745
B0CL5FH6PZ

The post Propeller Bag, Prop Wrench and Prop Block Stop appeared first on HardlineProducts.com.

• Yellow 1-1/16″ Marine / Boat Propeller Wrench.
• Fits propellers with a 1-1/16” nut.
• Includes a 9/16” Garboard / Drain Plug Socket.
• Will not slip.
• Made of non-corrosive durable glass reinforced composite material.
• Resistant to fuel, sun, salt water and other chemicals.
• Great to keep on board for emergencies – Not recommended for extended use.
• Highly visible color, easily recognizable in dark boat storage areas.
• Color- Yellow.
• Made in USAUPC: 6321947286125
  Click Here for Wrench and Prop Bag
• Fits the following:
• Mercury Outboards 25, 30, 40, 150, 175, 200, 225, 250, 300, 400, 450.
• Mercruiser Alpha 1 & Bravo 1
• Mariner
• Mariner Mercury
• Force V4 & V6
• Honda Outboards BF75-BF130
• OMC Cobra
• Volvo Penta SX
• May fit other Makes/Models that have a 1-1/16 ” prop nut
  Please verify your fitment.

The post Propeller Wrench 1-1/16″ Yellow Composite appeared first on HardlineProducts.com.

A fast acting Multi-Purpose Aerosol Foaming Cleaner/Degreaser that Cuts Grease, Grime and Heavy Soil on all Metal, Plastic, Gel-Coat, Appliances, Tools, Engines, Fiberglass, Stainless Steel, Aluminum and most Painted Surfaces.
Cleans, brightens and restores to almost new appearance. Quick and Easy Satisfying Spray-On Application.

Use on Boat, Motorcycle, UTV, ATV, Auto, RV and Home.

Use routinely to maintain. Formula has a balanced blend of synthetic cleaning aids designed to clean tough stains but not harm most surfaces. Always test inconspicuous area first.

• Also excellent on stubborn stains & tree sap.
• Anti-Static formula helps reduce dirt build-up after you clean.
• 18 fl. oz. can
• Eco-Friendly no CFC’s.
• Made in the USA

p/n RX-CLNR/DEG
UPC: 632194728592

The post RX Cleaner Degreaser appeared first on HardlineProducts.com.

Protect your prop and the people around it with this bag from Hardline Products. This Prop Bag helps prevent your prop(s) from getting dinged when stored or from being a hazard when towing. It fits all 3, 4, and 5-blade props from 12″ to 15-1/2 OD inches in diameter.

Our Prop Bag is made from 600 denier heavy duty nylon with reinforced padded sides. Its hook-and-loop closure offers a tight fit that won’t come off when towing. It also includes hand straps for transporting, other features include an interior pocket for locking tab keeper and nut, also includes grommet locking holes for simple security to outdrive.

This combo pack also includes a polymer wrench that is easy to use with a long handle for extra leverage. Has an extra deep well. Fits all outboards with 1 1/16″ prop nuts. Made for OMC motors over 40HP and Mercury motors over 50HP. Good wrench to have in your boat in case of emergencies.

• Use Bag on Bravo, Solas, Turning Point, Quicksilver, Mercury, Michigan Wheel and Hydromotive style propellers
and duo props. (One bag for each prop on duo when off the drive.)

• Bag Fits 2, 3, 4 and 5 blade propellers from 12″ 15 1/2″ O.D.

• Wrench is Emergency Polymer Prop Wrench for installation or removal. Size 1 & 1/16″  prop nuts.

• Wrench measures 2.75″ wide x 13″ long.

• Includes square drain plug installer/remover on backside of wrench. Size 9/16″ plugs

• Prop wrench will not corrode or scratch. Great to store in boat.

• UPC 632194728035
B0C357N4VY

Click here to order Bag, Wrench and Block

The post Propeller Bag with Prop Wrench appeared first on HardlineProducts.com.

• Five rung flexible nylon rope ladder 8 feet long.
• 5 Rungs (steps) are adjustable for depth in the water.
• Rungs (steps) are 10″ wide.
• Soft Neoprene Rungs (steps).
• Easy installation -no tools required.
• Adjustable -fits any pwc and most boats.
• Stores easily by rolling back on itself.
• Transferable from one vessel to the next.
• UV Treated Marine Rope.
• UV & weather Resistant Neoprene Rungs.
• 300 lb capacity.
• Mariners use as Emergency Ladder for MOB. Boarding ladders can be the difference between life and death in a Emergency situation.
• UPC:632194727274
  B0B224V4QW

The post EZ Riser Boarding Ladder™ appeared first on HardlineProducts.com.

Now, your first mate will never ask “What Side of the Boat is That Again?

(2) Vinyl Dipped Foam Key Floats in Red (Port) and Green (Starboard).
Easily denotes Port & Starboard side of the boat.
Largest Key Float Made, 3 5/8″ wide x 1” thick.
Will Float Multiple Keys.
Resists Fading and Cracking.
Alloy Brass Chain.

UPC: 632194726925

The post Port/Starboard Vinyl Dipped Key Floats appeared first on HardlineProducts.com.