Hour Meter Mounts | HardlineProducts.com

Multi-Meter Handlebar Mount for any Hour Meter

hardlineproducts — Wed, 24 Apr 2019 21:38:03 +0000

Multimeter Mount bracket for Handlebar or Tube Installation of Hardline Products Hour Meters.

Puts any Hardline Products® Hour Meter at your finger tips on your handlebar or roll cage/frame tube applications.

• Fits Diameter .70″ (18mm) to 1.18″ (30mm) handlebars or tubes.
• Fits any Hardline Products Hour Meter.
• Use on Pro-Taper® Eco, Contour, Pastrana & SE Bars.
• Fits Renthal® Fatbars, Oversized, Roadbars, MiniRacer & Twinwall.
• Includes Bracket, Rubber Pad, Fastners and Cable Ties.
• Adjustable for Best View.
• Will Not Corrode.
*Note: if using p/n HR-8062-2 use hook and loop that is included with meter.

UPC: 632194726840

Click here for install video

The post Multi-Meter Handlebar Mount for any Hour Meter appeared first on HardlineProducts.com.

Hour Meter Mount for KTM/Husqvarna

hardlineproducts — Tue, 27 Feb 2018 15:41:48 +0000

This hour meter mount replaces your KTM/Husky stock hour meter so you can use Hardline Products® hour meters with existing OEM threaded holes on your KTM/Husky motorcycle.

Use on any KTM/Husqvarna motorcycle that comes with factory hour meter on handlebars or under seat.

• Includes bracket and two screws
• Easy assembly.
• Uses bike’s existing wiring.
• Does not interfere with turning radius.
• Machined from Aluminum.
• Corrosion resistant.
• Made in the USA.
• UPC 632194726529

Directions for install:
step 1: Remove center bar pad and remove stock hour meter with allen wrench.
step 2: Clip wire of stock hour meter closest to housing.
step 3: Carefully peel back black insulation 1/2″ exposing red wire. Trim black insulation off.
step 4: Thread red wire through body of Hardline Products hour meter as per meter instructions.
Step 5: Mount bracket using supplied screws.
Step 6: Place meter on top of bracket and secure with serrated screws supplied with meter.
Step 7: Reassemble bar pad.

The post Hour Meter Mount for KTM/Husqvarna appeared first on HardlineProducts.com.

Boat Lettering chrome/black 3″ registration kit

hardlineproducts — Fri, 05 Jun 2015 19:10:34 +0000

This kit is for Boat lettering registration decals. Use on PWC’s too!

3 Inch Size factory-matched number color kit includes 4 each of the letters A-Z and the numbers 0-9, for a total of 146 decals. Available in DYI kit or pre-spaced and ready to install (scroll to bottom)

These boat lettering decal kits resist fuel, fading and scratches. They are UV Coated for protection from the sun and meet the US Coast Guard guidelines when installed correctly.

• Factory Matched colors
• Letter & Number kit for both sides of vessel.
• Use on boats or personal watercraft.
• Made from 4mil outdoor vinyl with super-stick adhesive.
• Made with real chrome vinyl.
• Airbrush blend from one color to the next color.
• Outline color shades into body color for custom painted look.
• Peel and apply.
• Made from Lead free inks.
• Choose a color combination that contrasts with the background of your application area.
• UPC:632194200043
B000KQHRDM

The post Boat Lettering chrome/black 3″ registration kit appeared first on HardlineProducts.com.

Hour Meter Mount for Husqvarna

hardlineproducts — Thu, 04 Jun 2015 19:31:14 +0000

Flush Mounts your Hardline Products® Hour Meter to new Husqvarna motorcycles, or any 6mm hole existing or drilled on other brands. This bracket utilizes your OEM frame hole behind the steering stem on new Husqvarna bikes. For Motocross bikes kit includes push fastener for quick installation. For Enduro bikes you pull out the existing headlight loom fastener and push it back through the bracket to attach. If you desire a different location then drill a 6mm hole in another location on the bike. Can be used on KTM bikes as well.

Made from aluminum will not corrode.
Polished.
Easy assembly
Does not interfere with turning radius
Corrosion resistant
Made in the USA
UPC:632194723924
B01E8XYLK4

The post Hour Meter Mount for Husqvarna appeared first on HardlineProducts.com.

Hour Meter Mount for KTM’s

hardlineproducts — Thu, 04 Jun 2015 19:26:54 +0000

Flush Mounts your Hardline Products® Hour Meter or Hour Tachometer to KTM motorcycle. This bracket utilizes your OEM frame hole behind the steering stem. For Motocross bikes kit includes push fastener for quick installation. For Enduro bikes you pull out the existing headlight loom fastener and push it back through the bracket to attach. If you desire a different location then drill a 6mm hole in another location on the bike.

Made from aluminum will not corrode.
Anodized Orange.
Easy assembly
Does not interfere with turning radius
Corrosion resistant
Made in the USA
UPC:632194723917
B01E8X00GI

The post Hour Meter Mount for KTM’s appeared first on HardlineProducts.com.

Hour Meter Instrument Style Mount™

hardlineproducts — Thu, 04 Jun 2015 18:58:56 +0000

Mounts your Hardline Products® Hour Meter Instrument style. Uses your OEM gas tank or frame bolt hole in front of gas tank. Works on any Hardline Products Meter® housing (old design or New Generation). Made from aluminum will not corrode.

Easy assembly.
Does not interfere with turning radius.
Machined from Aluminum.
Fits most 125’s and 250’s.
Corrosion resistant
Made in the USA
UPC:632194779099
B009XIQLAS
* does not fit 2023 Honda CRF 125 & 250

The post Hour Meter Instrument Style Mount™ appeared first on HardlineProducts.com.

Hour Meter steering Stem Mount

hardlineproducts — Thu, 04 Jun 2015 18:52:46 +0000

Mounts your Hardline Products® Hour Meter on the steering stem.
Do not use with Pro-Taper bars

Easy assembly
Does not interfere with turning radius
Fits 125’s, 250’s and larger
Made from Aluminum
Corrosion resistant
UPC:632194700123
B003RB3YVG

The post Hour Meter steering Stem Mount appeared first on HardlineProducts.com.