Nylon hook & loop buckled straps go through punched channels on the plate for attachment. Straps are adjustable and reusable.

Installs easily, plastic plates can be secured to hand lines or oar holders. Plate has enough space for your registration number sequence and yearly permit decal.

Use the grab handles, ore locks, D-rings or perimeter rope around your vessel to attach the plate. Some inflatable boat models have no where to attach the plates depending on the model and brand.

• Includes qty. four (4) Nylon hook & loop adjustable straps and two (2) marine grade ABS Plates.
• Sold in pairs.
• Resists fade fuel and scratches.
• Semi-Flexible, 1/16 ABS Plastic.
• 100% Nylon Strap with Buckle.
• Rounded di-cut corners.
• Salt-water tough.
• Made in the USA!
• UPC:632194728882

NOTE: A space for your State Registration Decal(s) (Tag) will be incorporated into the spacing on your Port and Starboard plates as per your States Guidelines. We have all the State Guidelines in our database.

If you have a tender and would like the name of the Tendered Vessel please call in your order at 888-413-8315

B0CVNHH18W

The post Registration Sticker Plate for Inflatable Dinghy, Boat or Tender with Velcro Straps w/ Registration Letters & Numbers Applied appeared first on HardlineProducts.com.

Nylon hook & loop buckled straps go through punched channels on the plate for attachment. Straps are adjustable and reusable.

Installs easily, plastic plates can be secured to hand lines or oar holders. Plate has enough space for your registration number sequence and yearly permit decal. (Registration numbers not Included) If you need numbers on your plate click Here

For lettering choose from any of Hardline Products Factory Matched Registration Letter & Number Kits. Click Here for Registration Number Kits

Use the grab handles, ore locks, D-rings or perimeter rope around your dinghy to attach the plate. Check your Dinghy! Some inflatable boat models have no where to attach the plates depending on the model.

• Includes qty. four (4) Nylon hook & loop adjustable straps and two (2) marine grade ABS Plates.
• Sold in pairs.
• Resists fade fuel and scratches.
• Semi-Flexible, 1/16 ABS Plastic.
• 100% Nylon Strap with Buckle.
• Rounded di-cut corners.
• Salt-water tough.
• Made in the USA!
UPC:632194728875
B0CVNHH18W

Installation Tip: Affix your numbers to the smooth side of the plate.

The post Registration Sticker Plate for Inflatable Dinghy, Boat or Tender with Velcro Straps appeared first on HardlineProducts.com.

Kit includes two plates, black 3″ registration numbers pre-applied in your sequence and cable-ties to mount plates.

Click on “CUSTOM BUILD IT FOR ME!” box below and enter your registration number and letter sequence then “BUY NOW”

Installs easily, plastic plates can be secured to hand lines or oar holders. Port side plate has adjusted spacing for your registration number sequence and yearly permit decal from your state.

• Sold in pairs. Starboard and Port plates.
• Resists fade fuel and scratches
• Semi-Flexible, 1/16 ABS Plastic.
• Includes qty. 4 zip ties.
• Rounded di-cut corners
• Salt-water tough

NOTE: A space for your State Registration Decal(s) (Tag) will be incorporated into the spacing on your Port and Starboard plates as per your States Guidelines. We have all the State Guidelines in our database.

If you have a tender and would like the name of the Tendered Vessel please call in your order at 888-413-8315

The post Registration Plates with Numbers Applied. appeared first on HardlineProducts.com.

Available in DYI kit or pre-spaced and ready to install (scroll to bottom)

These boat lettering decal kits resist fuel, fading and scratches. They are UV Coated for protection from the sun and meet the US Coast Guard guidelines when installed correctly.

This Number kit is specially designed for Inflatable boats and RIBS. These high tack adhesive decals will adhere to Hypalon or PVC Inflatables.

They can be applied directly to the rubber side of the boat. No plastic plate required. Size is 3 1/4 Inch and includes 4 sets of letters A-Z and numbers 0-9, for a total of 146 decals.

• Use directly on Hypalon or PVC Inflatables.
• Letter & Number kit for both sides of vessel.
• Can also be used on boats or personal watercraft (PWC).
• Made from 4mil outdoor vinyl with super-stick adhesive.
• Solid color in block font.
• Peel and apply.
• Made from Lead free vinyls.
• Choose a color combination that contrasts with the background of your application area.
• UPC:632194700130
B097HV3S96

Note 1: If you’re going to deflate your Inflatable, use these numbers on our plastic registration plate attached to the side of your inflatable. Part no. 11-5064

Note 2. If your inflatable is brand new it is suggested you inflate the vessel and put it out in the sun for a few weeks for the PVC or Hypalon to finish “Gassing”. Do this before applying any decals directly to the inflatable.

Note 3. There are new hybrid materials being used for Inflatables that these decals will not stick to. If your inflatable material has a canvas, mesh or small waffle like fabric feel we suggest testing one decal first on your boat. If you would like we can mail you a sample.  If it does not stick we recommend using our registration plates at the bottom of the page. Part no. 11-5064

The post Boat Lettering 3″ Registration kit for Inflatable’s appeared first on HardlineProducts.com.

Installs easily, plastic plates can be secured to hand lines or oar holders. Plate has enough space for your registration number sequence and yearly permit decal. (Registration numbers not Included) If you need numbers on your plate click Here

For lettering choose from any of Hardline Products Factory Matched Registration Letter & Number Kits.

Each package includes 4 cable ties (Zipties) to go through pre-drilled holes on the plate. Use the grab handles, ore locks, D-rings or perimeter rope around your vessel to attach the plate. Some inflatable boat models have no where to attach the plates depending on the model. Some customers have glued the plates on or used two-sided tape.

• Sold in pairs
• Resists fade fuel and scratches
• Semi-Flexible, 1/16 ABS Plastic.
• Includes qty. 4 zip ties.
• Rounded di-cut corners
• Salt-water tough
• Made in the USA!
• UPC:632194115064

Installation Tip: Affix your numbers to the smooth side of the plate.

The post Registration Plates for Inflatables and RIB’s appeared first on HardlineProducts.com.