Sale!

Rollastand™ for Sportbikes, Degreaser Kit

$45.99

SKU: RS-1/Deg

Description

Rollastand® Wheel Cleaning Stand for sport bikes or any chain driven bike is the answer to easier detailing of your bike, especially if you have a hard side bags with limited access area to the rims. The Rollastand allows you to easily clean the grime from both front and rear wheels of your motorcycle without having to push the bike forwards and backwards around your garage. The Rollastand also makes chain maintenance, inspecting tires and adjusting air pressure easier. Application is easy, just roll your front or rear tire onto the stand and then place bike on side stand. Front or rear tire will spin easily with one hand allowing you to clean more thoroughly and with less hassle.

RX Cleaner Degreaser™

A fast acting Multi-Purpose Aerosol Foaming Cleaner/Degreaser that Cuts Grease, Grime and Heavy Soil on all Metal, Plastic, Gel-Coat, Appliances, Tools, Engines, Fiberglass, Stainless Steel, Aluminum and most Painted Surfaces.
Cleans, brightens and restores to almost new appearance. Quick and Easy Satisfying Spray-On Application.

Use on Boat, Motorcycle, UTV, ATV, Auto, RV and Home.

Use routinely to maintain. Formula has a balanced blend of synthetic cleaning aids designed to clean tough stains but not harm most surfaces. Always test inconspicuous area first.

Using Rollastand to Clean & Lubricate Chains

 

Click here for video of Rollastand in use.

  • Designed for bikes without center-stands.
  • Easily clean Front or Back wheels.
  • Easy one person operation.
  • Bike uses existing kick stand.
  • Powder Coated.
  • Sealed bearings.
  • Non-slip backing grabs concrete.
  • For all chain driven sportbikes.
  • UPC:632194728610

SAFETY WARNING:
THIS PRODUCT IS A CLEANING AID FOR MOTORCYCLE WHEELS. THIS CLEANING AID MUST NEVER BE USED WITH MOTORCYCLE ENGINE RUNNING OR WITH THE MOTORCYCLE IN GEAR.
THE MANUFACTURER WARNS THAT WHEEL ROTATION MUST BE BY HAND ONLY.
THE MANUFACTURER ACCEPTS NO LIABILITY FOR INJURY TO PERSONS, OR DAMAGE TO PROPERTY THAT MAY RESULT FROM THE USE OR ABUSE OF THIS CLEANING AID.

INSTRUCTIONS FOR USE:
1. Use the Rollastand on a flat and level area, such as a concrete driveway or workshop floor. Do not use the Rollastand on sloping or uneven surfaces.
2. Make sure that the motorcycle ignition is switched off and the gear is neutral.

FOR REAR WHEEL USE:
1. Place the Rollastand a few inches in front of the back wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Allow the motorcycle to rest on the kickstand with the steering at full left lock. For heavier bikes it is recommended to straddle the bike when rolling onto the Rollastand.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle if desired.
5. The motorcycle rear wheel can now be rotated by hand to assist with cleaning or chain maintenance, if the wheel moves drifts to the side, reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a harder to turn when the Rollastand is not perpendicular to the tire.

FOR FRONT WHEEL USE.
1. Place the Rollastand 15 inches in front of the front wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bikes you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Keep the front wheel pointed straight ahead.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle.
5. The motorcycle front wheel can now be rotated by hand to assist with cleaning. The front wheel may nove to one side of the Rollastand¨ as it is being rotated. This can be corrected by changing the direction of the front wheel as it is being rotated or reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire

Your Rollastand is protected by a powder-coated finish and has sealed bearings for a long service life. Wipe dirt & oil off with a rag. Do not immerse in solvents. Store in a dry place.

The Rollastand comes with a 12 month warranty against defective materials and workmanship.

 

Additional information

Weight 4 lbs
Dimensions 11 × 11 × 11 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.