• Available in 4″ , 5.5″ and 7″ height
• Available in White or Black

These number sets have been sized to fill today’s modern motorsport number plates.

We recommend 5.5″ for 85cc 2-digit number plates and larger bikes 3 digit number plates.

7″ is very large and should only be used for single digit number plates.

• Made from 12-mil vinyl
• Pressure sensitive high tack adhesive vinyl specifically designed for Motocross, Enduro, Desert, Trials and PWC racing.
• Made in the USA

Instructions for Mounting:

1. Fold back 1/2″ of liner
2. Align numbers & tack into place
3. Peel liner & press down
4. Go racing!

The post Dirt Digits appeared first on HardlineProducts.com.

Our Training Wheels Trainer system allows for adjustability and adaptability. With our Trainer you can adjust the wheel height and mounting position for your type of riding terrain as well as rider’s skill level. As the rider gets better you can raise the wheels incrementally higher until balance is achieved. Start with training wheels fully down and as your riders skills and confidence increase raise the training wheels incrementally until they are fully up.

Installation is easy because our Trainer is specifically designed to fit the Evercross EV06M Electric Bike 24v 100W Balance Bike. Specific hardware designed for this bike and detailed directions and video walk-you through easy assembly.  Our Trainer mounts under the bike floorboard of the bike with specifically designed parts for the Evercross so you have the best balance, strength and durability. We use solid steel axle, clamps and billet aluminum bracket mounts with grade 8 bolts, washers and nylon nuts for a perfect fit every time.

Our Training Wheel Kit will give children quality “Seat Time” to develop important riding skills like balance and throttle control while offering parents complete confidence and satisfaction. The greatest attribute of the Training Wheels is that they are adjustable. As your new rider gets better at balancing and throttle control you can adjust the height of the wheels up to slowly help your rider achieve balance and confidence.

Manufactured by Hardline Products® Inc. the largest USA based manufacturer of youth training wheels for motorcycles and scooters.

• Specifically Fits on Evercross EV06M Electric Bike 24v 100W Balance Bike.
  Everything you need in one kit!
• Mounts under floorboard for the best strength and durability.
• Adjustable for for riders’ skill level.
• Solid Steel Axle, clamps, brackets, billet aluminum mounts and Grade 8 bolts and washers.
• Specifically designed with wheel spacing tolerance on the axle to corner better and absorb terrain impact.
• 8″ pneumatic wheels with quality 4 ply tires.
• Sealed Ball Bearings, will not corrode.
• Hardened fasteners.
• Designed and engineered in the USA, globally sourced parts.
• American based Customer service 888-413-8315 Factory hours 8-5 EST. English or Spanish.
• Limited Life time Guarantee.
• Training Wheels Kit does not include bike.
  UPC:632194728899
  ASIN:

Safety Warning:
FAILURE TO USE THIS AID CORRECTLY CAN RESULT IN SERIOUS INJURY OR DEATH. ONLY USE TRAINER FOR IT’S INTENDED PURPOSE. THIS PRODUCT IS INTENDED FOR BUILDING RIDING SKILLS ONLY.

DO NOT RIDE UNSUPERVISED BY AN ADULT.
DO NOT RIDE WITH FEET PLACED IN FRONT OF TRAINING WHEELS.
DO NOT USE AXLE AS FOOT PEGS. FEET NEED TO REMAIN ON SCOOTER FLOORBOARD.
DO NOT RIDE IN CONGESTED AREAS.
DO NOT RIDE ON PUBLIC ROADS.
DO NOT RIDE ON STEEP TERRAIN.
DO NOT RIDE FASTER THAN THE ABILITY OF THE RIDER.
DO NOT RIDE WITHOUT BOOTS, GLOVES AND HELMET.
DO NOT USE ON ROUGH TERRAIN.
DO NOT USE WITH MORE THAN ONE PERSON AT A TIME.
DO NOT MODIFY EITHER THE MOTORCYCLE OR TRAINING WHEELS.
DO NOT OPERATE WITH MISSING WHEEL.
DO NOT USE IN SOFT SAND.
DO NOT USE FOR OTHER PURPOSE.
DO NOT CHANGE WHEELS.
DO NOT USE IN EXCESS OF 10 MPH.
DO NOT RACE OTHER VEHICLES.
DO NOT RIDE WITH A PASSENGER.
ALWAYS WEAR PROPER GEAR AND HELMET.
RIDE SMART! AND BE CONSIDERATE OF OTHERS!

DISCONTINUE USE IF ANY PART IS BROKEN, BENT OR MISSING.

Training Wheels Action Video

The post Training Wheels for Evercross EV06M Electric Bike for Kids appeared first on HardlineProducts.com.

The post Clipstrip of Sticker-Off! appeared first on HardlineProducts.com.

The post Clipstrip of Sticker-On! appeared first on HardlineProducts.com.

Specifically designed for the Cyclone X-Pro Dirt Bike our training wheel system will allow for adjustability and adaptability. With our Training Wheels you can adjust the wheel height and mounting position for your type of riding terrain as well as rider’s skill level. As the rider gets better raise the wheels incrementally higher until balance is achieved.

Installation is easy because our Trainer Wheels has specific hardware for this mini bike. Inclusive directions and video walk-you through assembly. Our Trainer mounts under the footpegs for the best balance, strength and durability.

This trainer will give children quality “seat time” to develop important riding skills while offering parents complete confidence and satisfaction. The greatest attribute of the Trainer is, it is adjustable for your entry level rider and then the wheels and axle can be moved higher as the rider’s skill level gets better.

• Specifically Fits the Cyclone X-Pro Dirt Bike.
• Mounts to foot peg frame bracket for the best strength and durability.
• Stock footpegs stay in factory position.
• Specifically designed with wheel spacing tolerance on the axle to corner better and absorb terrain impact.
• Adjustable for terrain and riders’ skill level.
• 5/8″ Solid Steel Axle with CNC machined & stamped components for accurate fit.
• 8 inch pneumatic on/off road wheels with quality 4 ply tires.
• Brass alloy air stem and grease fitting on wheels.
• Sealed Ball Bearings on wheels.
• Hardened fasteners.
• Glossy black powder-coat paint finish.
• Step by Step picture installation instructions and online video.
• Limited Life time Guarantee.
• UPC:632194728783
  B0CNQB35PQ
• Safety Warning:
  FAILURE TO USE THIS AID CORRECTLY CAN RESULT IN SERIOUS INJURY OR DEATH. ONLY USE UNIVERSAL TRAINER FOR IT’S INTENDED PURPOSE. THIS PRODUCT IS INTENDED FOR BUILDING RIDING SKILLS ONLY.
  DO NOT RIDE UNSUPERVISED BY AN ADULT.
  DO NOT RIDE WITH OR PLACE FEET IN FRONT OF TRAINING WHEELS
  DO NOT RIDE IN CONGESTED AREAS
  DO NOT RIDE ON PUBLIC ROADS
  DO NOT RIDE ON STEEP TERRAIN
  DO NOT RIDE FASTER THAN THE ABILITY OF THE RIDER
  DO NOT RIDE WITHOUT BOOTS AND HELMET
  DO NOT USE ON ROUGH TERRAIN
  DO NOT USE WITH MORE THAN ONE PERSON AT A TIME
  DO NOT MODIFY EITHER THE MOTORCYCLE OR TRAINING WHEELS
  DO NOT OPERATE WITH MISSING WHEEL
  DO NOT USE IN SOFT SAND
  DO NOT USE FOR ANY OTHER PURPOSE
  DO NOT CHANGE WHEELS
  DO NOT USE IN EXCESS OF 10 MPH
  DO NOT RACE OTHER VEHICLES
  DO NOT RIDE WITH A PASSANGER
  ALWAYS WEAR PROPER GEAR AND HELMET
  RIDE SMART! AND BE CONSIDERATE OF OTHERS!DISCONTINUE USE IF ANY PART IS BENT, BROKEN OR MISSING.Installation VideoTraining Wheels Action Video

Product Review Video

Ryder’s 1st Ride!

The post Training Wheels for Cyclone X-Pro Dirt Bike appeared first on HardlineProducts.com.

RX Cleaner Degreaser

A fast acting Multi-Purpose Aerosol Foaming Cleaner/Degreaser that Cuts Grease, Grime and Heavy Soil on all Metal, Plastic, Gel-Coat, Appliances, Tools, Engines, Fiberglass, Stainless Steel, Aluminum and most Painted Surfaces.
Cleans, brightens and restores to almost new appearance. Quick and Easy Satisfying Spray-On Application.

Use on Boat, Motorcycle, UTV, ATV, Auto, RV and Home.

Use routinely to maintain. Formula has a balanced blend of synthetic cleaning aids designed to clean tough stains but not harm most surfaces. Always test inconspicuous area first.

Using Rollastand to Clean & Lube Chains

Click here for video of Rollastand in use.

• Designed for bikes without center-stands.
• Easily clean Front or Back wheels.
• Easy one person operation.
• Bike uses existing kick stand.
• Powder Coated.
• Sealed bearings.
• Non-slip backing grabs concrete.
• For all chain driven sportbikes.
• UPC:632194728603
  B0C3J7HLQV

SAFETY WARNING:
THIS PRODUCT IS A CLEANING AID FOR MOTORCYCLE WHEELS. THIS CLEANING AID MUST NEVER BE USED WITH MOTORCYCLE ENGINE RUNNING OR WITH THE MOTORCYCLE IN GEAR.
THE MANUFACTURER WARNS THAT WHEEL ROTATION MUST BE BY HAND ONLY.
THE MANUFACTURER ACCEPTS NO LIABILITY FOR INJURY TO PERSONS, OR DAMAGE TO PROPERTY THAT MAY RESULT FROM THE USE OR ABUSE OF THIS CLEANING AID.

INSTRUCTIONS FOR USE:
1. Use the Rollastand on a flat and level area, such as a concrete driveway or workshop floor. Do not use the Rollastand on sloping or uneven surfaces.
2. Make sure that the motorcycle ignition is switched off and the gear is neutral.

FOR REAR WHEEL USE:
1. Place the Rollastand a few inches in front of the back wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Allow the motorcycle to rest on the kickstand with the steering at full left lock. For heavier bikes it is recommended to straddle the bike when rolling onto the Rollastand.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle if desired.
5. The motorcycle rear wheel can now be rotated by hand to assist with cleaning or chain maintenance, if the wheel moves drifts to the side, reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a harder to turn when the Rollastand is not perpendicular to the tire.

FOR FRONT WHEEL USE.
1. Place the Rollastand 15 inches in front of the front wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bikes you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Keep the front wheel pointed straight ahead.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle.
5. The motorcycle front wheel can now be rotated by hand to assist with cleaning. The front wheel may nove to one side of the Rollastand¨ as it is being rotated. This can be corrected by changing the direction of the front wheel as it is being rotated or reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire

Your Rollastand is protected by a powder-coated finish and has sealed bearings for a long service life. Wipe dirt & oil off with a rag. Do not immerse in solvents. Store in a dry place.

The Rollastand comes with a 12 month warranty against defective materials and workmanship.

The post Rollastand™ for Cruisers, Cleaning Kit appeared first on HardlineProducts.com.

RX Cleaner Degreaser

A fast acting Multi-Purpose Aerosol Foaming Cleaner/Degreaser that Cuts Grease, Grime and Heavy Soil on all Metal, Plastic, Gel-Coat, Appliances, Tools, Engines, Fiberglass, Stainless Steel, Aluminum and most Painted Surfaces.
Cleans, brightens and restores to almost new appearance. Quick and Easy Satisfying Spray-On Application.

Use on Boat, Motorcycle, UTV, ATV, Auto, RV and Home.

Use routinely to maintain. Formula has a balanced blend of synthetic cleaning aids designed to clean tough stains but not harm most surfaces. Always test inconspicuous area first.

Using Rollastand to Clean & Lubricate Chains

Click here for video of Rollastand in use.

• Designed for bikes without center-stands.
• Easily clean Front or Back wheels.
• Easy one person operation.
• Bike uses existing kick stand.
• Powder Coated.
• Sealed bearings.
• Non-slip backing grabs concrete.
• For all chain driven sportbikes.
• UPC:632194728610

SAFETY WARNING:
THIS PRODUCT IS A CLEANING AID FOR MOTORCYCLE WHEELS. THIS CLEANING AID MUST NEVER BE USED WITH MOTORCYCLE ENGINE RUNNING OR WITH THE MOTORCYCLE IN GEAR.
THE MANUFACTURER WARNS THAT WHEEL ROTATION MUST BE BY HAND ONLY.
THE MANUFACTURER ACCEPTS NO LIABILITY FOR INJURY TO PERSONS, OR DAMAGE TO PROPERTY THAT MAY RESULT FROM THE USE OR ABUSE OF THIS CLEANING AID.

INSTRUCTIONS FOR USE:
1. Use the Rollastand on a flat and level area, such as a concrete driveway or workshop floor. Do not use the Rollastand on sloping or uneven surfaces.
2. Make sure that the motorcycle ignition is switched off and the gear is neutral.

FOR REAR WHEEL USE:
1. Place the Rollastand a few inches in front of the back wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Allow the motorcycle to rest on the kickstand with the steering at full left lock. For heavier bikes it is recommended to straddle the bike when rolling onto the Rollastand.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle if desired.
5. The motorcycle rear wheel can now be rotated by hand to assist with cleaning or chain maintenance, if the wheel moves drifts to the side, reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a harder to turn when the Rollastand is not perpendicular to the tire.

FOR FRONT WHEEL USE.
1. Place the Rollastand 15 inches in front of the front wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bikes you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Keep the front wheel pointed straight ahead.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle.
5. The motorcycle front wheel can now be rotated by hand to assist with cleaning. The front wheel may nove to one side of the Rollastand¨ as it is being rotated. This can be corrected by changing the direction of the front wheel as it is being rotated or reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire

Your Rollastand is protected by a powder-coated finish and has sealed bearings for a long service life. Wipe dirt & oil off with a rag. Do not immerse in solvents. Store in a dry place.

The Rollastand comes with a 12 month warranty against defective materials and workmanship.

The post Rollastand™ for Sportbikes, Degreaser Kit appeared first on HardlineProducts.com.

RX Cleaner Degreaser

A fast acting Multi-Purpose Aerosol Foaming Cleaner/Degreaser that Cuts Grease, Grime and Heavy Soil on all Metal, Plastic, Gel-Coat, Appliances, Tools, Engines, Fiberglass, Stainless Steel, Aluminum and most Painted Surfaces.
Cleans, brightens and restores to almost new appearance. Quick and Easy Satisfying Spray-On Application.

Use on Boat, Motorcycle, UTV, ATV, Auto, RV and Home.

Use routinely to maintain. Formula has a balanced blend of synthetic cleaning aids designed to clean tough stains but not harm most surfaces. Always test inconspicuous area first.

Rx UV Protectant Cleaner & Polish

Rx UV Protectant Cleaner & Polish is Specifically Made for the Protection and Longevity of Today’s Modern Plastics, Polycarbonates, Vinyl Glass, Stainless Steel, Aluminum and Paint.

Our Advanced Formula exceeds the standard for protecting plastic, paint and metal surfaces found on Boats, Motorcycles, PWC, ATV’s, UTV’s and all the accessories that go with them.

Rx UV Protectant Cleaner & Polish seals the surface with a micro-thin layer of UV protectant. This advanced formula restores nutrients that sun, water and dirt take away. Just one use moisturizes and restores shine quickly and easily.

Use Rx UV Protectant Cleaner & Polish to clean and protect any plastic and metal. Just spray and wipe clean.

• Rx UV Protectant Cleaner & Polish Provides 100% UVA and UVB protection.

• Rx UV Protectant Cleaner & Polish cleans and protects from dirt, water spots, salt spray and grime.

• Use Rx UV Protectant Cleaner & Polish on vinyl glass routinely to preserve clarity and prevent costly repairs. For boaters with vinyl windows this product is a must! Use often and your vinyl glass will stay supple and clear.

• For ragtop automobiles and clear bras, use between washings to maintain UV protection and shine and help prevent scratches.

• Rx UV Protectant Cleaner & Polish conditions vinyl glass and helps avoid costly repairs from scratches and sun damage.

• Rx UV Protectant Cleaner & Polish is an Advanced Formula UV Protectant that is safe to use on gauge lenses, bezels, trim, instruments, hatches and windscreens to protect from oxidation and add shine to your surfaces.

• Excellent for Stainless Steel and Aluminum and solid surfaces like granite. Leaves a smooth slick shine that repels water, fingerprints and stains. Makes clean up easier.

• Rx UV Protectant Cleaner & Polish has an Anti-Static formula that reduces salt residue, dirt buildup. Contaminates don’t stick as easily and wash away easier with frequent use of RX.

• Great for Motorcycle, UTV, PWC plastic paint and bodywork. Gives you that showroom shine. Use on helmets and visors to repel water for better visibility.

• For Best results use Micro-Fiber Towels. See our website for great towels!
Never use paper towels.

• Made in the USA!

Rollastand Cleaning & Lubing Chain

Click here for video of Rollastand in use.

• Designed for bikes without center-stands.
• Easily clean Front or Back wheels.
• Easy one person operation.
• Bike uses existing kick stand.
• Powder Coated.
• Sealed bearings.
• Non-slip backing grabs concrete.
• For all chain driven sportbikes.
• UPC:632194728627

SAFETY WARNING:
THIS PRODUCT IS A CLEANING AID FOR MOTORCYCLE WHEELS. THIS CLEANING AID MUST NEVER BE USED WITH MOTORCYCLE ENGINE RUNNING OR WITH THE MOTORCYCLE IN GEAR.
THE MANUFACTURER WARNS THAT WHEEL ROTATION MUST BE BY HAND ONLY.
THE MANUFACTURER ACCEPTS NO LIABILITY FOR INJURY TO PERSONS, OR DAMAGE TO PROPERTY THAT MAY RESULT FROM THE USE OR ABUSE OF THIS CLEANING AID.

INSTRUCTIONS FOR USE:
1. Use the Rollastand on a flat and level area, such as a concrete driveway or workshop floor. Do not use the Rollastand on sloping or uneven surfaces.
2. Make sure that the motorcycle ignition is switched off and the gear is neutral.

FOR REAR WHEEL USE:
1. Place the Rollastand a few inches in front of the back wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Allow the motorcycle to rest on the kickstand with the steering at full left lock. For heavier bikes it is recommended to straddle the bike when rolling onto the Rollastand.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle if desired.
5. The motorcycle rear wheel can now be rotated by hand to assist with cleaning or chain maintenance, if the wheel moves drifts to the side, reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a harder to turn when the Rollastand is not perpendicular to the tire.

FOR FRONT WHEEL USE.
1. Place the Rollastand 15 inches in front of the front wheel.
2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.
3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bikes you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Keep the front wheel pointed straight ahead.
4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle.
5. The motorcycle front wheel can now be rotated by hand to assist with cleaning. The front wheel may nove to one side of the Rollastand¨ as it is being rotated. This can be corrected by changing the direction of the front wheel as it is being rotated or reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire

Your Rollastand is protected by a powder-coated finish and has sealed bearings for a long service life. Wipe dirt & oil off with a rag. Do not immerse in solvents. Store in a dry place.

The Rollastand comes with a 12 month warranty against defective materials and workmanship.

The post Rollastand™ for Sportbikes, Cleaning & Detail Kit appeared first on HardlineProducts.com.

Rollastand® Wheel Cleaning Stand for Harley® and Metric cruisers is the answer to easier detailing of your bike, especially if you have a bagger with limited access area to the rims. The Rollastand allows you to easily clean the grime from both front and rear wheels of your motorcycle without having to push the bike forwards and backwards around your garage. The Rollastand also makes chain maintenance, inspecting tires and adjusting air pressure easier. Application is easy, just roll your front or rear tire onto the stand and then place bike on side stand. Front or rear tire will spin easily with one hand allowing you to clean more thoroughly and with less hassle.

RX Cleaner Degreaser

A fast acting Multi-Purpose Aerosol Foaming Cleaner/Degreaser that Cuts Grease, Grime and Heavy Soil on all Metal, Plastic, Gel-Coat, Appliances, Tools, Engines, Fiberglass, Stainless Steel, Aluminum and most Painted Surfaces.
Cleans, brightens and restores to almost new appearance. Quick and Easy Satisfying Spray-On Application.

Use on Boat, Motorcycle, UTV, ATV, Auto, RV and Home.

Use routinely to maintain. Formula has a balanced blend of synthetic cleaning aids designed to clean tough stains but not harm most surfaces. Always test inconspicuous area first.

RX UV Protectant Cleaner & Polish

Rx UV Protectant Cleaner & Polish is Specifically Made for the Protection and Longevity of Today’s Modern Plastics, Polycarbonates, Vinyl Glass, Stainless Steel, Aluminum and Paint.

Our Advanced Formula exceeds the standard for protecting plastic, paint and metal surfaces found on Boats, Motorcycles, PWC, ATV’s, UTV’s and all the accessories that go with them.

Rx UV Protectant Cleaner & Polish seals the surface with a micro-thin layer of UV protectant. This advanced formula restores nutrients that sun, water and dirt take away. Just one use moisturizes and restores shine quickly and easily.

Use Rx UV Protectant Cleaner & Polish to clean and protect any plastic and metal. Just spray and wipe clean.

• Rx UV Protectant Cleaner & Polish Provides 100% UVA and UVB protection.

• Rx UV Protectant Cleaner & Polish cleans and protects from dirt, water spots, salt spray and grime.

• Use Rx UV Protectant Cleaner & Polish on vinyl glass routinely to preserve clarity and prevent costly repairs. For boaters with vinyl windows this product is a must! Use often and your vinyl glass will stay supple and clear.

• For ragtop automobiles and clear bras, use between washings to maintain UV protection and shine and help prevent scratches.

• Rx UV Protectant Cleaner & Polish conditions vinyl glass and helps avoid costly repairs from scratches and sun damage.

• Rx UV Protectant Cleaner & Polish is an Advanced Formula UV Protectant that is safe to use on gauge lenses, bezels, trim, instruments, hatches and windscreens to protect from oxidation and add shine to your surfaces.

• Excellent for Stainless Steel and Aluminum and solid surfaces like granite. Leaves a smooth slick shine that repels water, fingerprints and stains. Makes clean up easier.

• Rx UV Protectant Cleaner & Polish has an Anti-Static formula that reduces salt residue, dirt buildup. Contaminates don’t stick as easily and wash away easier with frequent use of RX.

• Great for Motorcycle, UTV, PWC plastic paint and bodywork. Gives you that showroom shine. Use on helmets and visors to repel water for better visibility.

• For Best results use Micro-Fiber Towels. See our website for great towels!
   Never use paper towels.

• Made in the USA!

Rollastand Cleaning & Lubing Chain

Rollastand Video Auto

• Heavy duty design for bigger bikes and belt driven models.
• Deep knurled rollers for more traction on belt driven motorcycles.
• Designed for bikes without center-stands.
• Use on Front or Back wheels.
• Eliminates moving your bike 2 feet at a time to get to every part of the rim and spokes during cleaning.
• Low profile-Easy One Person Operation.
• Powder Coated Finish & Sealed Bearings.
• Also great for Chain Maintenance and shim alignment.
• Will work on any size motorcycle.
• No assembly required. Ready to use.
• 1 year limited warrenty.
• UPC:632194000025

SAFETY WARNING:
THIS PRODUCT IS A CLEANING AID FOR MOTORCYCLE WHEELS. THIS CLEANING AID MUST NEVER BE USED WITH MOTORCYCLE ENGINE RUNNING OR WITH THE MOTORCYCLE IN GEAR.
THE MANUFACTURER WARNS THAT WHEEL ROTATION MUST BE BY HAND ONLY.
THE MANUFACTURER ACCEPTS NO LIABILITY FOR INJURY TO PERSONS, OR DAMAGE TO PROPERTY THAT MAY RESULT FROM THE USE OR ABUSE OF THIS CLEANING AID.

INSTRUCTIONS FOR USE:

1. Use the Rollastand¨ on a flat and level area, such as a concrete driveway or workshop floor. Do not use the Rollastand on sloping or uneven surfaces.

2. Make sure that the motorcycle ignition is switched off and the gears are in neutral.
FOR REAR WHEEL USE:

1. Place the Rollastand a few inches in front of the back wheel.

2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.

3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bike you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Allow the motorcycle to rest on the kickstand with the steering at full left lock.

4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle if desired.

5. The motorcycle rear wheel can now be rotated by hand to assist with cleaning or chain maintenance, if the wheel moves drifts to the side, reposition the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire.

FOR FRONT WHEEL USE.

1. Place the Rollastand a few inches in front of the front wheel.

2. Make sure that the rollers of the Rollastand¨ are at right angles to the direction the wheel to be cleaned. See photo`s on packaging or above.

3. Take the weight of the Motorcycle off the side stand and manually roll the motorcycle onto the Rollastand¨. For heavier bikes you may want to straddle the bike. You will feel a small bump as the Motorcycle wheel rides over the first roller, allow the wheel to come to rest between the rollers. Keep the front wheel pointed straight ahead.

4. Some owners may feel that their motorcycle is leaning too much at this point. Add a small wood block under the side stand to adjust the attitude of the motorcycle.

5. The motorcycle front wheel can now be rotated by hand to assist with cleaning. The front wheel may move to one side of the Rollastand¨ as it is being rotated. This can be corrected by changing the direction of the front wheel as it is being rotated or repositioning the Rollastand a few degree’s to the left on the ground before you roll your bike onto it. Some bikes with allot of kickstand rake will cause the wheel to drift when “Saddled” in the Rollastand. The wheel will not fall off the Rollastand but it is a bit harder to turn when the Rollastand is not perpendicular to the tire.

Your Rollastand is protected by a powder-coated finish and has sealed bearings for a long service life. Wipe dirt & oil off with a rag. Do not immerse in solvents. Store in a dry place.
The Rollastand comes with a 12 month warranty against defective materials and workmanship.

The post Rollastand™ for Cruisers, Cleaning & Detail Kit appeared first on HardlineProducts.com.

Specifically designed for the Orion RXB-eForce Electric Motorcycle our training wheel system will allow for adjustability and adaptability. With our Training Wheels you can adjust the wheel height and mounting position for your type of riding terrain as well as rider’s skill level. As the rider gets better raise the wheels incrementally higher until balance is achieved.

This Training Wheels kit is truly “one unit” that meets the demands of the training wheel market for Mini-Bikes.

Installation is easy because our Training Wheels kit has specific hardware for this motorcycle. Inclusive directions and video walk-you through assembly. Our Trainer mounts under the footpegs for the best balance, strength and durability.

This trainer will give children quality “seat time” to develop important riding skills while offering parents complete confidence and satisfaction. The greatest attribute of the Trainer is, it is adjustable for your entry level rider and then the wheels and axle can be moved higher as the rider’s skill level gets better.

• Specifically Fitted for the Orion RXB-eForce Electric Motorcycle.
• Mounts to foot peg frame bracket for the best strength and durability.
• Stock footpegs stay in factory position.
• Specifically designed with wheel spacing tolerance on the axle to corner better and absorb terrain impact.
• Adjustable for terrain and riders’ skill level.
• 5/8″ Solid Steel Axle with CNC machined & stamped components for accurate fit.
• 8 inch pneumatic on/off road wheels with quality 4 ply tires.
• Brass alloy air stem and grease fitting on wheels.
• Sealed Ball Bearings on wheels.
• Hardened fasteners.
• Glossy black powder-coat paint finish.
• Step by Step picture installation instructions and online video.
• Limited Life time Guarantee.
• UPC:632194728585
  B0C8PMZ5NN
• Safety Warning:
  FAILURE TO USE THIS AID CORRECTLY CAN RESULT IN SERIOUS INJURY OR DEATH. ONLY USE UNIVERSAL TRAINER FOR IT’S INTENDED PURPOSE. THIS PRODUCT IS INTENDED FOR BUILDING RIDING SKILLS ONLY.
  DO NOT RIDE UNSUPERVISED BY AN ADULT.
  DO NOT RIDE WITH OR PLACE FEET IN FRONT OF TRAINING WHEELS
  DO NOT RIDE IN CONGESTED AREAS
  DO NOT RIDE ON PUBLIC ROADS
  DO NOT RIDE ON STEEP TERRAIN
  DO NOT RIDE FASTER THAN THE ABILITY OF THE RIDER
  DO NOT RIDE WITHOUT BOOTS AND HELMET
  DO NOT USE ON ROUGH TERRAIN
  DO NOT USE WITH MORE THAN ONE PERSON AT A TIME
  DO NOT MODIFY EITHER THE MOTORCYCLE OR TRAINING WHEELS
  DO NOT OPERATE WITH MISSING WHEEL
  DO NOT USE IN SOFT SAND
  DO NOT USE FOR ANY OTHER PURPOSE
  DO NOT CHANGE WHEELS
  DO NOT USE IN EXCESS OF 10 MPH
  DO NOT RACE OTHER VEHICLES
  DO NOT RIDE WITH A PASSENGER
  ALWAYS WEAR PROPER GEAR AND HELMET
  RIDE SMART! AND BE CONSIDERATE OF OTHERS!DISCONTINUE USE IF ANY PART IS BENT, BROKEN OR MISSING
  Let’s Ride VideoClick here for install videoProduct Review VideoRyder’s 1st Ride!

The post Training Wheels for Orion RXB-eForce Electric Motorcycle appeared first on HardlineProducts.com.